Inspector

Inspector M is a servo driven rotary inspection machine, that allows handling of up to 200 containers per minute.

3.1.       Inspection Machine

Ÿ   Standard inspection:

Mechanical plug and ring gauging

Dip saddle, and height gauging

8 channels of modulated check inspection.- with 2 rotate stations

Mould number reading (Heel dot code)

Out of round

Ÿ   Defect detected:

Inspect M is designed to detect following defects:

Choked neck

Oversized ring

Finish, neck, shoulder, body, heel, and base checks

Finished deformities- dip and saddle finish

Over max and under min height

Out of round container

Ÿ   Power requirements: 800/400/415 VAC, 3-Phase

Ÿ   Air requirements:

Min.: 3.5 Bar(%) PSI

Max:7 Bar(100PSI)

Max Consumption:0.8-0.85 M3/Min [20-30cf,]

Ÿ   Temperature specification:

Maximum(without cooling): 40°C [104.F]

Maximum(without cooling): 50°C [122.F]

Minimum: 1°C [34.F]

Relative humidity: 95%(non-condensing)

Ÿ   Machine speed

Maximum: 200bpm

Minimum: 60bpm

Speed in effected by container dimensions, shape, star wheel configuration, and plug penetration

Ÿ   Demension

Length: 2834mm

Width: 1162mm

Height: 2095mm-2695mm( For a conveyor height between 900mm and 1500mm)

Inspector